Wednesday, November 16, 2011

Armorcast vs Forgeworld

 Just another size comparison for those who were curious. As you can see from the photo the Forgeworld Phantom titan is a bit bigger. The Armorcast Phantom titan is on a base which gives it a bit more height.
Now all we need is for these two boys to fight each other...

Thursday, September 29, 2011

MiniWarGaming Apocalypticon 2011



Had a lot fun here, and can't wait till next year. My plan was initially to film the whole event but my camera pooped out on me for some strange reason. But what I've got filmed is the before the game and a view of some of the armies...


http://www.miniwargaming.com/

Friday, September 23, 2011

Armorcast Phantom Titan update

Shoulder is finally done. The wing is next...

ForgeWorld Phoenix Bomber



Still have a few more to paint...

Thursday, September 22, 2011

Nuadhu FireHeart



This model is still WIP. But people ask about it so here ya are...

Thursday, August 4, 2011

Eldar Lynx

 Well I recently acquired a Eldar Lynx for the big MiniWarGaming Apocalypse Event. I plan on having it painted... or mostly painted...Hope it doesn't get killed too quickly...
As you may notice I mounted on the acrylic rods that I use for the planes and other superheavies. I think it looks better flying higher...

Wednesday, July 13, 2011

Update time...

I'm still alive and well... been busy with life and the paths we walk...

I've been added to Miniwargaming's ranks... I'll be doing some painting videos and such for them.

Monday, May 23, 2011

Falcon Type 2.5

Here is a conversion I've been dying to make and finally finished. The conversion consists of a falcon chasis, Fire prism turret & vector engines, Forgeworld Falcon type 2 piece, and 2 Pulse laser barrels.

I've been thinking of making a Apoc rule for it, kinda like a mini scorpion...





Any ideas for a name? I looked up names for smaller scorpions... and DeathStalker is the only one I kinda liked.

Sunday, May 15, 2011

Forgeworld Phantom vs Armorcast Phantom

Another comparison for those who care. I've yet to see these two models together, so here you go. The FW Phantom is not done yet but we can see the height difference. The Armorcast Phantom is also on a base that adds to the height as well... which still makes the FW model still taller. Can't wait to see this model finished...


The pelvis is at the same height as the chest of the old phantom...

Friday, May 13, 2011

Forgeworld Eldar Scorpion Type I & Type II

 This is for anybody that has wondered 'which is bigger?" Well here you go, at first glance the type I appears to be bigger as it is a bit taller. The type II looks to be broader but doesn't have the high profile as the type I.
 The type II has a lot more surface area. More like a puffed out cobra (snake not the model).
The type I weighs more though, early forgeworld models have big resin parts.

Saturday, April 30, 2011

Eldar Terrain : Statues of Asurman

Here is some terrain I've been working on for my Eldar themed table.

These are the only pieces that will be like this, imitating design we already know.









The plan is to design completely new elements that still fit with eldar design....



 Easier said than done!

Thursday, April 28, 2011

Monday, April 18, 2011

Forgeworld Eldar Vampire Hunter

Just a little update, painting chevrons... freehand. I'll be painting the top to a finished standard, then the underside...

Friday, April 15, 2011

Apocalypse Battle Report: Dark Angel vs Eldar

5000 point battle between the Saim Hann and the Dark Angels. The Eldar give the new Forgeworld rules a try... I'd have to play a few more games before I render a verdict.


Friday, April 8, 2011

Forgeworld Eldar Vampire Hunter

Update, just for those wondering if I've been working on this guy.... I'm planning having this done soon.

Friday, April 1, 2011

Thursday, March 31, 2011

Battle Report: Imperial Guard vs Saim-Hann Eldar

Battle Report time... 2000 point battle between the monkeigh hordes and the Eldar of the Saim Hann.


Tuesday, March 22, 2011

Saim Hann Air Superiority

Update time, so here is my Air force for my craftworld. I think this is as many planes as I'm going to get for a long while...













Wednesday, March 16, 2011

Eldar Air Superiority

I wonder if this is enough? Maybe a few more?

Tuesday, March 15, 2011

Saim Hann CloudStrike Formation

Here is what I'm planning for my CloudStrike formation, when in flying mode they will be on these bases so it is obvious what mode they are in. Also it looks cool...

Wednesday, March 2, 2011

Saim Hann Army

Between paint sessions I like to play with my camera...
 Once I get my backdrop issue solved I'll reshoot some of these...
I need to get my table finished, so it doesn't look like my army is flying across someones lawn...

Monday, February 28, 2011

Forgeworld Eldar Vampire Hunter update


Just a update on the Vampire Hunter, engine nozzles are mostly finished, next will be the red areas...

Wednesday, February 16, 2011

Forgeworld Eldar Vampire Hunter pt.4

Small update, Basecoating is finished. Started to work on the base. I hope to get to some highlighting this weekend.







Can't wait to take it into battle again...

Sunday, February 13, 2011

Saim Hann Army

Update on my Army. More work done on the Vampire Hunter. More squads completed. Just need to catch up on painting...




Sunday, February 6, 2011

Wednesday, February 2, 2011

Forgeworld Eldar Vampire Hunter pt.3

Small update, the Vampire is assembled and ready to be primed. I've seen some out there that where not fully assembled for ease of painting... but I'd rather the model be strong than convenient.






Here is how I mount it: N24 magnet (same kind used on the Phoenix), and two brass pins for stability and strength. Simply drilled or bored out the space to fit the magnet and pins. No glue, tension keeps them in place.





Here is the mounting point on the Vampire. Carved out a space to fit the magnet, glued and greenstuffed. One minor detail though, the center of gravity is at the models weakest points. It's almost like no thought was given as to how a person was going to mount it.



Tuesday, February 1, 2011

Allies of the Saim Hann

The Saim Hann have allies, they can bring the firepower as well...



Tuesday, January 25, 2011

Eldar Table pt. 1

Here is something I've been working on. This is just a test section for a much larger project. A Eldar themed modular board. This is a project between myself and a good friend, we've been planning this since September.





Here is the fun part... led illumination on the water. The water will play a big part of the board. Once we are producing the board sections I'll show the plans. So you all know what we are going for. Then the terrain, lots of fun planned for that as well.


Monday, January 24, 2011

Forgeworld Eldar Vampire Hunter pt.2

Small Update: The main Hull is glued and green stuff to fill in the gaps.







As I started to fill in the gaps I realized that some of the parts didn't line up right. I knew some of it would when I dry fit everything but... Green stuff to the rescue.






The edge from the head to the body was fine but I want it to look seamless, also added more from the wing section to the hull, feels more eldar.






Also did the same for the tail end of the wing, I didn't like how it just ends abruptly. It all looks a mess right now but when it's sanded it will look better... I hope.






Just more adding detail. The cockpit section was a greater width than the body so the is a 2 mm difference. I sculpted some extra plates to make it more seamless...

Friday, January 14, 2011

Forgeworld Eldar Vampire Hunter pt.1

As of right now this model is held together entirely by brass rod and tension. I used a 1 inch acrylic rod for the stem, which I've not seen anyone else try... It's a flyer! why not use something that is clear?